Filter
Top Products
Interface Statistics Screen
2H28-08R SmartSwitch 2208 User’s Guide 5-63
CLEAR COUNTERS (Command)
This command is used to reset all statistics counters to zero. For details on
how to use this field, refer to Section 5.18.1.
5.18.1 Using the Clear Counters Command
To reset all the statistics counters to zero, perform the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS field.
2. Press ENTER to reset the counters for the selected port to zero.
5.19 INTERFACE STATISTICS SCREEN
The Interface Statistics screen, Figure 5-25, is used to gather MIB-II
statistics for all of the 2H28-08R interfaces (ports 1 through 6) and Fast
Ethernet Interface Module(s) (ports 7 and 8).
To access the Interface Statistics screen, use the arrow keys to highlight
the INTERFACE STATISTICS menu item on the Device Statistics
Menu screen and press ENTER. The Interface Statistics screen displays.
Figure 5-25 Interface Statistics Screen
Firmware Revision: XX.XX.XX
Interface Statistics
2286_64
BOOTPROM Revision: XX.XX.XX
RETURN
Device Type: 2H28-08R
2H28-08R LOCAL MANAGEMENT
Event Message Line
Interface: [ 1 ]
InOctets:
InUnicast:
InNonUnicast:
InDiscards:
InErrors:
InUnknownProtos:
OutOctets:
OutUnicast:
OutNonUnicast:
OutDiscards:
OutErrors:
OutQLen:
Name: Fast Ethernet Frontpanel
7500456
6789
0
0
0
0
0
0
0
0
0
0
CLEAR COUNTERS
EXIT
Interface: 1
Address:
Last Change:
Admin Status:
Oper Status:
MTU:
Speed:
Link Status:
Duplex Mode:
00-00-1D-00-00-00
xx days 00:00:00
UP
UP
1514
100000000
LINK
100BASE-FX