Filter
Top Products
SNMP Community Names Screen
2H28-08R SmartSwitch 2208 User’s Guide 5-31
5.8 SNMP COMMUNITY NAMES SCREEN
The SNMP Community Names screen allows the user to set SNMP
Management community names. Community names act as passwords to
Local/Remote Management and are agents of security access to the
2H28-08R. Access to the 2H28-08R is controlled by enacting any of three
different levels of security authorization (read-only, read-write, and
super-user).
To access the SNMP Community Names screen from the Device
Configuration Menu screen, use the arrow keys to highlight the SNMP
COMMUNITY NAMES menu item and press ENTER. The SNMP
Community Names screen, Figure 5-14, displays.
Figure 5-14 SNMP Community Names Screen
NOTE
Super-user access gives the user full management privileges,
allows existing passwords to be changed, and all modifiable
MIB objects for the Cabletron Container MIB and Internet
MIB-II to be edited.
Firmware Revision: XX.XX.XX
SNMP Community Names
2286-16
Device Type: 2H28-08R
BOOTPROM Revision: XX.XX.XX
Access Policy
read-only
read-write
super-user
2H28-08R LOCAL MANAGEMENT
Event Message Line
RETURNSAVE
EXIT
Community Name
public
public
public