Filter
Top Products
Chapter 5: Local Management
5-64 2H28-08R SmartSwitch 2208 User’s Guide
The following defines each field of the Interface Statistics screen:
Interface (Read-Only)
This field displays the interface number for which statistics are currently
being displayed. Figure 5-25 shows the interface field displaying 1. This
represents Port 1 of the module. To view other interface statistics refer to
Section 5.19.1.
Name (Read-Only)
The Name field displays the type of port for which statistics are being
displayed.
InOctets (Read-Only)
This field displays the total number of octets (bytes) that have been
received on the interface. This includes all octets from bad frames, and
framing characters.
InUnicast (Read-Only)
The InUnicast field displays the total number of frames that have been
received that were sent to a single address.
InNonUnicast (Read-Only)
This field displays the total number of frames that have been received that
were delivered to a broadcast or multicast address.
InDiscards (Read-Only)
The InDiscards field displays the total number of inbound frames that
were discarded, even though the frames contained no errors. This field
may increment because the switch needed to free up buffer space, or the
switch was being overutilized.
InErrors (Read-Only)
This field displays the total number of inbound frames that have been
discarded because they contained errors. This field represents the total
number of errored frames, regardless of the cause of the error.
InUnknownProtos (Read-Only)
The InUnknownProtos field displays the total number of frames that were
discarded because the frames were in an unknown or unsupported format.