Filter
Top Products
Chapter 4: Troubleshooting
4-6 2H28-08R SmartSwitch 2208 User’s Guide
4.4 USING THE RESET BUTTON
The RESET button, shown in Figure 4-3, resets the 2H28-08R processor
without affecting the NVRAM.
Figure 4-3 RESET Button
To reset the 2H28-08R processor, press and release the RESET button. A
non-conductive tool is recommended for use in pushing the recessed
button. The 2H28-08R goes through a reset process for approximately
45 seconds. The 2H28-08R may be unreachable for a short time as it
reenters the network.
!
CAUTION
Pressing the RESET button resets the device, and all switching
being performed by the device is halted for approximately two
minutes.
RESET Button
2380_03