Chapter 5: Local Management
5-8 2H28-08R SmartSwitch 2208 User’s Guide
5.4 ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Local
Management Password screen shown in Figure 5-3. Whenever a
connection is made to the 2H28-08R, the Local Management Password
screen displays. Before continuing, the user must enter a password
(community name) which is compared to the previously stored
passwords. The level of access allowed the user depends on the password.
To set or change passwords, refer to Section 5.8. The following steps
describe the procedure to access Local Management.
1. Turn on the terminal. Press ENTER (up to four times may be needed
to engage the autobaud capability) until the 2H28-08R Local
Management Password screen displays.
Figure 5-3 Local Management Password Screen
2. Enter the Password and press ENTER. The default super-user access
password is “public” or press ENTER.
2H28-08R LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc. 1997
Module Serial Number:
Module Hardware Revision:
Module Firmware Revision: XX.XX.XX
Module BOOTPROM Revision: XX.XX.XX
Enter Password:
Event Message Line