Cabletron Systems 2H28-08R Switch User Manual


 
Chapter 5: Local Management
5-66 2H28-08R SmartSwitch 2208 User’s Guide
MTU (Read-Only)
The MTU (Maximum Transmission Unit) field displays the maximum
frame size (in octets) that a frame may contain to be received or
transmitted from this interface.
Speed (Read-Only)
The Speed field displays an estimate of the interface’s current bandwidth
in bits per second.
Link Status (Read-Only)
This field displays the current link status of the interface. This field
displays either “Link” or “No Link”.
Duplex Mode (Read-Only)
This field indicates whether the interface is operating in normal (standard)
or full duplex mode. This field displays the actual setting of the port, or
“Standard”, or “Full Duplex”.
Interface [nn] (Command)
This field is used to select an interface number for viewing statistics. For
instructions on how to use this field refer to Section 5.19.1.
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to Section 5.19.2.
5.19.1 Displaying Interface Statistics
To display the statistics for any interface, proceed as follows:
1. Use the arrow keys to highlight the Interface [nn] field at the bottom
of the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to
decrement) the interface number.
Press ENTER (neither the Interface # field nor the statistics will update
until ENTER is pressed).