Filter
Top Products
Energy Saver Mode
1-8
Introduction
1
Energy Saver Mode
This machine provides an energy saver function. When no operations are
performed for about 5 minutes, the machine automatically enters the energy saver
mode.
NOTE
•
The time until the machine enters the energy saver mode can be specified in a range of 3
minutes to 30 minutes. You can also turn off the energy saver function. For details on the
energy saver mode settings, see <4. ENERGY SVR TIME> of "Menu Descriptions," on p.
10-4.
•
The energy saver function does not activate when the machine is in the following
conditions:
- When printing out copies, faxes* or other pages
- When sending or receiving faxes*
- When scanning
- While a copy job is saved in the memory or when the collate copy or other functions are
operating
- When paper jams occur
- When an error code appears and the Alarm indicator flashes
- When no paper is loaded in the cassette or multi-purpose feeder
- When <PRESS SET KEY> is displayed
*Only for the MF5550 model.
•
The machine will be restored from the energy saver mode in the following conditions:
- When receiving print jobs from your computer
- When receiving faxes*
- When you load documents in the ADF
- When you pick up the handset of the telephone connected to the machine*
- When receiving a call*
*Only for the MF5550 model.
Setting the Energy Saver Mode Manually
1
Press [Energy Saver].
The LCD is turned off and the Energy Saver key lights up.
NOTE
Right after the machine is restored from the energy saver mode, or right after copying
finishes, wait about 2 seconds before pressing [Energy Saver].