Filter
Top Products
LCD Messages
9-10
Troubleshooting
9
INCORRECT PAPER SIZE ↔ CASS PAPER MISMATCH
Cause The size of the paper in the cassette or multi-purpose feeder is different from
that of the paper specified in <PAPER SIZE> in <COMMON SETTINGS> of the
Menu.
Remedy Load the correct paper size or change <PAPER SIZE> in <COMMON
SETTINGS> of the Menu. (See "Loading Paper," on p. 2-4, or "Specifying the
Paper Size," on p. 5-3.)
Then reset the machine by opening the front cover and then closing it.
INSTALL CARTRIDGE ↔ TONER SUPPLY LOW
Cause The cartridge is not installed or not installed correctly.
Remedy Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-14.)
LOAD LTR SIZE PAPER
Cause No LTR-size paper is loaded in the cassette or multi-purpose feeder.
Remedy Load LTR-size paper in the cassette or multi-purpose feeder. (See "Loading
Paper," on p. 2-4.)
MEMORY FULL
PRESS SET KEY
Cause The machine's memory is full because the collate copy function was set when a
large document is loaded.
Remedy Divide the document and copy each part separately.
If <MEMORY FULL> and <PRESS SET KEY> appear while scanning
documents using the ADF, the document being scanned stops in the ADF. In
this case, press [Set] to make the document come out automatically.
PRINTER DATA ERROR
Cause A problem has occurred in the data transmission between the machine and
your computer.
Remedy Use System Monitor to delete the current print job.