Filter
Top Products
16
Connecting to a Power Source
Connect the DZ-3600U to a power source with the supplied power cord.
This explanation assumes that you have already removed the main unit
and accessories from the box and placed them on a stable surface. If you
have not yet unpacked them, read and follow the steps described in
Removing the Equipment from the Box (P.106), then find a suitable
location.
!!! Important !!!
• Do not use a power cord other than the one supplied. Plug it into a 120-
volt electrical outlet only. Use with other voltages may result in fire,
electric shock or other hazards.
• Ensure that the power switch on the main unit is set to Off before you
plug in the power cord.
VIDEO S VIDEOVIDEO S VIDEO
USB
AC INLET
60/100
HandShake
Reserved
Service Mode
RS-232C
OFFON
OUTPUT
EXT
IN 1
EXT
IN 2
1.
Insert the female end of
the power cord (the end
with 3 holes) into the AC
Inlet on the main unit’s
rear panel.
Power Cord (supplied)
2.
Plug the other end of the
power cord into an electrical
outlet.
Rear Panel of the Main Unit