Filter
Top Products
17
1
Setup for Operation with a Computer
Connecting to a Computer
When connected to a computer, the main unit can load captured images onto
the computer or be controlled from the computer.
For instructions on how to operate the equipment without a
computer, see Chapter 4, Operating without a Computer.
VIDEO S VIDEOVIDEO S VIDEO
USB
AC INLET
60/100
HandShake
Reserved
Service Mode
RS-232C
OFFON
OUTPUT
EXT
IN 1
EXT
IN 2
1.
Confirm that the power
is off on the main unit
and all other devices.
2.
Insert one end of the
USB cable into the USB
port on the main unit’s
rear panel.
Rear Panel of the Main Unit
Computer
USB Cable
3.
Insert the other end of
the USB cable into the
computer’s USB port.
To Connect a Projector or Large Screen
Monitor
Insert one end of the VGA cable into the
computer’s video output port, and the
other end into the video input port of
the projector or large screen monitor.
VGA Cable
Projector or Large
Screen Monitor
There are many
varieties of video
output ports on
computers and video
input ports on
projectors and large
screen monitors.
Ensure that your
cables match your
equipment.
Computer