Filter
Top Products
91
4
Operationg without a Computer
BNC Video Cable
BNC to Pin Adapter
Pin to BNC Adapter
VIDEO S VIDEOVIDEO S VIDEO
USB
AC INLET
60/100
HandShake
Reserved
Service Mode
RS-232C
OFFON
OUTPUT
EXT
IN 1
EXT
IN 2
1.
Ensure that the main unit and other devices
are turned off.
Rear Panel of
the Main
Unit
BNC Video Cable
Video Monitor or
Projector
3.
Insert the plug on the other end of the BNC
video cable into the video input port on the
video monitor or projector, and secure it.
•••␣ Note •••
• If the video in port on the video monitor or projector is a pin-type port, you
will need t o use a BNC t o Pin adapter , such as the one pictur ed to the left,
which is r eadily av ailable on the market.
• Conversely , you may use a pin-type video cable o f the kind commonly used
on home-use VCRs with a Pin to BNC adapter attached to the DZ-3600U end
of the cable . However, this type o f cable is gener ally pr one to significant
signal loss , which means that the decr ease in image quality will incr ease in
proportion t o the length o f the cable .
• An external VCR may also be connected t o either output port if it is fr ee to
record DZ-3600U images . The audio portion o f the pr esentation, ho wever,
should be recorded with a separate microphone connected directly to the VCR
because the audio portion will be transmitted through the S video or video
output port.
2.
Insert the plug on one end of the
BNC video cable into the video
output port on the main unit.
• Turn the plug in the port to secure it.
Connecting to a Video Monitor or Projector