Filter
Top Products
90
VIDEO S VIDEOVIDEO S VIDEO
USB
AC INLET
60/100
HandShake
Reserved
Service Mode
RS-232C
OFFON
OUTPUT
EXT
IN 1
EXT
IN 2
Connecting to a Video Monitor or
Projector
Use an S video cable or BNC video cable to connect the DZ-3600U to a video
monitor or projector.
•••␣ Note •••
• The S video and BNC video cables mentioned here are sold separately. Obtain
a cable long enough to reach between the devices at the site in which they
will be used.
• Standard television sets may be used as video monitors if they are equipped
with a video in jack.
S Video Cable
1.
Ensure that the main unit and
other devices are turned off.
2.
Insert the plug on one end of the
S video cable into the S video
output port on the main unit.
Rear Panel of the Main Unit
3.
Insert the plug on the other end of the
S video cable into the S video input
port on the video monitor or projector.
S Video Cable
Video Monitor or
Projector