Filter
Top Products
67
3
An Introduction to the Features
Adjusting the Focus of
Preview Images
The focus is normally adjusted with the autofocus function, but it can be
adjusted manually with the procedures below.
!!! Important !!!
• Do not forget to reset the DZ-3600U to autofocus (auto indicator on)
after you have manually adjusted an image and are displaying the next.
• Pressing the [Auto] button in autofocus mode will turn off the
autofocus. There will not be any noticeable change until another docu-
ment or object is substituted and appears out of focus.
••• Note •••
• Use the manual focus when you wish to focus on different parts of a three-
dimensional object. Please note that the focal range is approximately 65 mm
or greater with the lens zoomed in.
• It may be difficult to focus on some objects - such as glossy items, translu-
cent items, dark cloth and other items with a low reflection profile - with the
autofocus. Use the manual focus for these objects.
• The focus can be adjusted manually even in still mode if the control panel is
used. However, the change in focus cannot be verified unless a video monitor
is directly connected to the DZ-3600U.
Procedure with the Remote Control
To Adjust the Focus to a
Closer Setting
Press the [Near] button.
• Autofocus will shut off when the button is pressed.
To Adjust the
Focus to a More
Distant Setting
Press the [Far] button.
• Autofocus will shut off when
the button is pressed.
FOCUS
BRIGHTNESS
W
ZOOM
T
LIGHTS
–+
COLOR
AUTO NEAR FAR
APP REV FWD
To Turn Autofocus On/Off
Press the [Auto] button.
• Autofocus is turned on or off each time the button is pressed.
Preview
Mode