Printing on Envelope
2-27
Loading and Delivering Paper
2
Printing on Envelope
This section describes the procedure for printing on envelopes.
Loading Envelope
The paper sources in which you can load envelopes are the cassette and the
manual feed slot. For continuous print, load envelopes in the cassette.
For printing on one envelope that differs in type from paper in the cassette, set it in
the manual feed slot.
IMPORTANT
•
Before printing on envelopes that are fed from the cassette, make sure that paper is not
set in the manual feed slot. If paper is set in the manual feed slot, the paper in the manual
feed slot is fed first.
•
Do not set paper in the manual feed slot while printing is being made with envelopes fed
from the cassette. If you do so, the paper in the manual feed slot is fed, resulting in
double-feeds or paper jams.
•
Printing speed drops when printing on envelops.
•
The following shows the usable envelopes for this printer.
•
Do not use the following types of envelopes. Using inappropriate envelopes may result in
paper jams that are difficult to clear or may result in damaging the printer.
-Envelopes with fasteners or snaps
-Envelopes with address windows
-Envelopes with adhesive on the surface
* Envelopes with a flap on the short edge cannot be used.
Envelope Monarch
98.5 mm x 190.5 mm
(3.88 inch x 7.50 inch)
Envelope DL
110.0 mm x 220.0 mm
(4.33 inch x 8.66 inch)
Envelope COM10
104.9 mm x 241.3 mm
(4.13 inch x 9.50 inch)
Envelope C5
162.0 mm x 229.0 mm
(6.38 inch x 9.02 inch)