Filter
Top Products
8-3
Maintenance
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If cleaning does not start
When there are jobs stored in the memory, this function is not
available.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5
Press [ ] (Menu) to close the menu screen.
Cleaning the ITB
If dirt sticks to the transfer belt and results in a deterioration in
print quality, clean the transfer belt inside the machine.
OK
Men
u
Keys to be used for this operation
1
Press [ ] (Menu).
2
Press [ ] or [ ] to select <Adjustment/
Cleaning>, and then press [OK].
Menu
Send/Receive Settin...
Printer Settings
Timer Settings
Adjustment/Cleaning
3
Press [ ] or [ ] to select <Clean ITB>, and then
press [OK].
Adjustment/Cleaning
Black Text Processi...
Special Processing
Clean Fixing Unit
Clean ITB
4
Press [OK].
Cleaning starts. It takes approx. 51 seconds for MF8350Cdn and
approx. 83 seconds for MF8050Cn.
Clean ITB
Start
5
Press [ ] (Menu) to close the menu screen.
Cleaning the Platen Glass
Follow this procedure to clean the platen glass and under
surface of the feeder.
WARNING
When cleaning the outside of the machine
Turn OFF the main power switch and disconnect the power cord from
the AC power outlet. Failure to do so can result in a re or electrical
shock.
CAUTION
When closing the feeder
Be careful not to get your ngers caught.
1
Open the feeder.
2
Clean the platen glass and the under surface of
the feeder.
(1) Clean the areas with a cloth dampened with water.
(2) Wipe the areas with a soft, dry cloth.
3
Close the feeder.