Filter
Top Products
6-8
Using the Fax Functions
4
After responding to the recoded message of the
information service, press [ ] (Tone).
You can switch to the tone signal.
Specify destination.
2010 01/01 12:52AM
012XXXXXXT
Start Receiving
Resolution: 200 x 1...
5
Use the numeric keys to enter the required
numbers for the information service.
Specify destination.
2010 01/01 12:52AM
012XXXXXXT3456
Start Receiving
Resolution: 200 x 1...
6
If you want to send faxes, press [ ] (B & W).
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Telephone call
The external telephone must be connected to this machine.
Check the dial tone before entering a fax number.
If you enter the number before checking the dial tone, the call may
not be connected or the wrong number may be dialed.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sending a Fax Abroad (Adding Pauses)
When sending a fax abroad, you may need to insert a pause
within the number.
When communicating abroad, the signal distance is extreme
and the signal route complicated. Because of this, you may not
be able to connect to a recipient by dialing an international
telephone identi cation number, country code, and the
recipient's fax number at the same time. In this case, add a
pause after the international telephone identi cation number.
Because adding a pause provides a point where wait time can
be added when dialing, it is easier to connect to the recipient.
FAX Numeric keys
Start
Pause
Keys to be used for this operation
1
Place documents on the platen glass or load them
in the feeder.
"Placing Documents" (
→
P.2-4)
"Documents Requirements" (
→
P.2-2)
2
Press [ ].
3
Set scanning settings for documents as needed.
"Fax Settings" (
→
P.6-3)
4
Use the numeric keys to enter the international
access code.
For details on international access codes, contact the telephone
company you are subscribed with.
Fax
012
5
Press [ ] (Pause) to enter a pause as needed.
The letter <p> indicating a pause is displayed.
A pause in the number represents a 2-second pause. To change
the pause time, see "Pause Time" (
→
P.6-23) .
When you are adding pauses consecutively, press [ ] (Pause)
again.
Fax
012P
6
Enter the country code, the area code, and the
fax/telephone number using the numeric keys.
Fax
012p031XXXXXX
•
•
•