Filter
Top Products
Chapter 3 Booting and Configuring the CSS
Using the Configuration Script
3-14
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
!**************** SERVICE ****************
service Server1
ip address 192.168.3.58
active
service Server2
ip address 192.168.3.59
active
!**************** OWNER ******************
owner L3_Owner
content L3_Rule
add service Server1
add service Server2
vip address 192.168.3.6
balance aca
active
##########################################
## Setup Completed Successfully!!! ##
##########################################
For detailed configuration information, refer to the Content
Services Switch Basic Configuration Guide.
Configuring Layer 5 Load Balancing
A Layer 5 load-balancing configuration enables the CSS to use a VIP address to
load balance Web traffic to Web servers based on URLs.
When you select Layer 5 load balancing, the script automatically:
• Creates an owner (L5_Owner)
• Creates a Layer 3 content rule (L3_Rule)
• Creates a Layer 5 content rule (L5_Rule) and defines:
–
Protocol tcp
–
Port 80
–
URL "/*"
–
Load balance method as ACA
• Activates the services
• Activates the content rule
• Saves the running-config to the startup-config