Filter
Top Products
2-27
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
Chapter 2 Cabling the CSS
Connecting the Power Cord
3. Plug the power cord into a dedicated 3-wire grounding receptacle.
4. To power on and boot the CSS, refer to Chapter 3, Booting and Configuring
the CSS.
Connecting a CSS 11503 Power Cord
The following sections provide information on:
• Connecting a CSS 11503 AC Power Cord
• Connecting a CSS 11503 DC Power Cord
Connecting a CSS 11503 AC Power Cord
To connect an AC power cord to a CSS 11503:
1. At the rear of the chassis, ensure that the CSS power switch is in the O (off)
position.
2. Plug the AC power cord connector into the CSS power connector, as shown
in Figure 2-12.
Figure 2-12 Connecting a CSS 11503 AC Power Cord
1 Power switch 2 AC power connector
100-240V
~
50-60 Hz
5A
430 W
59543
2
1