Filter
Top Products
1-15
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
Chapter 1 Unpacking and Installing the CSS
Installing the CSS 11503
Installing a CSS 11503 as a Rackmounted Unit
Before you rack-mount the CSS 11503:
• Determine if you want to front-mount or mid-mount the mounting brackets
on the CSS chassis. Refer to the location of the mounting bars in the
equipment cabinet to determine the mount position of the mounting brackets.
• Install the mounting brackets on the CSS, as described below.
Before you begin, you need the mounting brackets and the eight Phillips screws
shipped in the accessory kit accompanying the CSS 11503, and a #1 Phillips
screwdriver.
To install the mounting brackets on the CSS chassis:
1. Position the CSS with its front panel facing you. On the left and right sides
of its chassis, note the screw holes for installing the mounting brackets.
2. Position a mounting bracket on one side of the chassis. Align it with the
appropriate screw holes for front- or mid-mounting.
Figure 1-2 illustrates front-mounting the mounting brackets. Figure 1-3
illustrates mid-mounting of the brackets.
Figure 1-2 Front-Mounting the Mounting Brackets on the CSS 11503
CISCO 11500
SERIES
C
O
N
T
E
N
T
S
E
R
V
I
C
E
S
S
W
I
T
C
H
1
2
3
59538
CSS5-SCM-2GE
System Control
DUPLEX
LINK/ACT
MANAGEMENT
10BASE-T
SLOT 0
SLOT 1
GE 1
GE 2
LINK
LINK
STATUS
PCMCIA
CO
NS
OLE
1
2
4
5
1
5
1
4
1
3
1
2
1
1
10
9
8
7
6
3
CSS5-10M-16FE
DPLX
16 Fast Ethernet
DPLX
LINK
LINK
1
2
4
5
1
5
1
4
13
1
2
1
1
1
0
9
8
7
6
3
CSS5-10M-16FE
DPLX
16 Fast Ethernet
DPLX
LINK
LINK