Filter
Top Products
2-1064
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show logging
qos 7 7
radius 7 7
rsvp 7 7
security 7 7
snmp 7 7
spantree 7 7
sys 7 7
tac 7 7
tcp 7 7
telnet 7 7
tftp 7 7
udld 7 7
vmps 7 7
vtp 7 7
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
Console> (enable)
Table 2-46 describes the fields in the show logging command output.
Related Commands clear logging server
set logging console
set logging history
set logging level
set logging server
set logging session
show logging buffer
Table 2-46 show logging Command Output Fields
Field Description
Logging buffered size Size of the logging buffer.
timestamp option Status of whether the timestamp option is enabled or disabled.
Logging history size Size of the logging history buffer.
Logging history
severity
Severity level at which point errors are logged to the history table.
Logging console Status of whether logging to the console is enabled or disabled.
Logging telnet Status of whether logging to the Telnet session is enabled or
disabled.
Logging server Status of whether logging to the logging server is enabled or
disabled.
Facility Name of the facility to be logged.
Server/Severity Severity level at which point an error from that facility is logged.
Current Session
Severity
Severity level at which point an error from that facility is logged
during the current session.
0 (emergencies), 1
(alerts)...
Key to the numeric severity level codes.