2-1108
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show mls flowmask
show mls flowmask
To display the MLS flow mask configuration, use the set mls flowmask command.
show mls flowmask
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines In software release 8.5(1), multiple flow masks are supported.
Examples These examples show output with various configurations when no features are configured on the route
processor:
Console> show mls flowmask
Netflow Data Export is enabled
NDE Flowmask is configured to use atleast Null flowmask
Console>
Console> show mls flowmask
Netflow Data Export is enabled and is using Full flowmask
NDE Flowmask is configured to use atleast Full flowmask
Console>
Console> show mls flowmask
Netflow Data Export is disabled
NDE Flowmask is configured to use atleast Full flowmask
Console>
This example shows output when NAT is configured on the RP:
Console> show mls flowmask
The MSFC features are using NotVlanFullFlow and VlanFullFlowOnly flow mask on vlan(s)
10-11,50-51,90-91.
Netflow Data Export is disabled
NDE Flowmask is configured to atleast the Null flowmask
Console>