Filter
Top Products
2-598
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set port macro
set port macro
To execute a configuration macro on a per-port basis, use the set port macro command.
set port macro mod/ports... ciscoipphone vlan vlan [auxvlan auxvlan]
set port macro mod/ports... ciscosoftphone vlan vlan
set port macro mod/ports... ciscodesktop vlan vlan
set port macro mod/ports... ciscorouter nativevlan nativevlan [allowedvlans vlan]
set port macro mod/ports... ciscoswitch nativevlan nativevlan [allowedvlans vlan]
set port macro mod/ports... macro_name
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
mod/ports... Number of the module and the ports on the module.
ciscoipphone Specifies the Cisco IP Phone SmartPort configuration macro.
vlan Specifies a VLAN interface.
vlan Number of the VLAN or VLANs.
auxvlan (Optional) Specifies an auxiliary VLAN.
auxvlan (Optional) Number of the auxiliary VLAN.
ciscosoftphone Specifies the Cisco Softphone SmartPort configuration macro.
ciscodesktop Specifies the Cisco Desktop SmartPort configuration macro.
ciscorouter Specifies the Cisco Router SmartPort configuration macro.
nativevlan Specifies the native VLAN for IP phone traffic.
nativevlan Number of the native VLAN.
allowedvlans (Optional) Specifies the VLAN or VLANs that are allowed on the trunk.
ciscoswitch Specifies the Cisco Switch SmartPort configuration macro.
macro_name Name of a user-defined macro to apply to a port. See the “Usage
Guidelines” section for more information about applying a user-defined
macro.