2-371
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set ethernet-cfm vlan
set ethernet-cfm vlan
To associate a VLAN in a specific maintenance domain with a customer service instance identifer
(CSID), use the set ethernet-cfm vlan command.
set ethernet-cfm vlan vlans domain domain-name service csi-id
Syntax Description
Defaults No CSID is assigned to any VLAN.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines Use this command to associate the VLAN and the CSID.
Be sure that the maintenance domain and the CSID exist before you enter this command.
Examples This example shows how to associate VLAN 120 in the domain customerYZDomain with the CSID of
custZ:
Console> (enable) set ethernet-cfm vlan 120 domain customerYZDomain service custZ
Vlan 120 is mapped to csid custZ..
Console> (enable)
vlans VLAN or a range of VLANs in the specified maintenance domain. Valid
values: any integer or range of integers (examples, 10, 10 to 120).
domain domain-name Domain where VLAN is located. Valid values: any string representing the
domain name (example, customerYZDomain)
service csi-id Customer service instance identifer to associate with VLAN. Valid value:
any string.