2-111
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear port flexlink
clear port flexlink
To clear an active-backup (peer) Flexlink pair of ports, use the clear port flexlink command.
clear port flexlink mod/port [peer mod/port]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to clear port 3/48 as the Flexlink active port and port 3/47 as the Flexlink
backup (peer) port:
Console> (enable) clear port flexlink 3/48 peer 3/47
Port 3/48 and 3/47 flexlink pair cleared
Console> (enable)
Related Commands set port flexlink
show port flexlink
mod/port Number of the module and the port on the module.
peer (Optional) Specifies the peer port for the Flexlink active port.