2-597
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set port mac-auth-bypass
This example shows how to initialize the MAC address authentication bypass state for a port so that the
port can participate in authentication again:
Console> (enable) set port mac-auth-bypass 3/1 initialize
Mac-Auth-Bypass successfully Initialized 3/1.
Console> (enable)
This example shows how to reauthenticate the MAC address of a port:
Console> (enable) set port mac-auth-bypass 3/1 reauthenticate
Reauthenticating MAC address 00-00-00-00-00-01 on port 3/1 using Mac-Auth-Bypass.
Console> (enable)
Related Commands set mac-auth-bypass
show mac-auth-bypass
show port mac-auth-bypass