2-355
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set eou revalidate
set eou revalidate
To revalidate a host, use the set eou revalidate command.
set eou revalidate {all | ip ip_addr | mac mac_addr | posture-token posture_token}
set eou revalidate authentication {clientless | eap | static}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to revalidate all hosts:
Console> (enable) set eou revalidate all
EoU LPIP revalidation started for all hosts
Console> (enable)
This example shows how to revalidate all clientless hosts:
Console> (enable) set eou revalidate authentication clientless
Revalidate all clientless hosts
Console> (enable)
all Revalidates all EoU ports.
ip ip_addr Revalidates a port with the specified IP address.
mac mac_addr Revalidates a port with the specified MAC address.
posture-token
posture_token
Revalidates all ports with the specified posture token.
authentication Revalidates all ports of a specific authentication type.
clientless Revalidates all clientless ports.
eap Revalidates all ports with EAP authentication.
static Revalidates all hosts in an exception list.