Filter
Top Products
2-1455
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show vlan counters
show vlan counters
To display counters for all VLANs or a range of VLANs, use the show vlan counters command.
show vlan counters [vlans]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The show vlan counters command is available only on the Supervisor Engine 2 and the
Supervisor Engine 720.
Examples This example shows how to display counters for VLAN 1:
Console> show vlan counters 1
Vlan :1
L2-Unicast-Pkts :3081
L3-In-Unicast-Pkts :0
L3-Out-Unicast-Pkts :0
L2-NonUnicast-Pkts + L3-In-NonUnicast-Pkts :4021
L3-Out-NonUnicast-Pkts :0
L2-Unicast-Octets :238081
L3-In-Unicast-Octets :0
L3-Out-Unicast-Octets :0
L2-NonUnicast-Octets + L3-In-NonUnicast-Octets :273025
L3-Out-NonUnicast-Octets :0
Console>
Table 2-111 describes the fields in the show vlan counters command output.
vlans Number or range of VLANs; valid values are from 1 to 4094.
Table 2-111 show vlan counters Output Fields
Field Description
L2-Unicast-Pkts Layer 2 unicast packets forwarded per VLAN.
L3-In-Unicast-Pkts Layer 3 unicast packets forwarded per input VLAN.
L3-Out-Unicast-Pkts Layer 3 unicast packets forwarded per output VLAN.
L2-NonUnicast-Pkts +
L3-In-NonUnicast-Pkts
Layer 2 nonunicast packets forwarded per VLAN and Layer 3
nonunicast packets forwarded per input VLAN.