2-895
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set web-auth
set web-auth
To enable or disable web-based proxy authentication globally, use the set web-auth command.
set web-auth {disable | enable}
Syntax Description
Defaults Disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines
Note If you have disabled web-based proxy authentication globally, web-based proxy authentication on a port
may not start but will be stored in the configuration.
Examples This example shows how to enable web-based proxy authentication globally:
Console> (enable) set web-auth enable
web-authentication successfully enabled on globally.
Console> (enable)
This example shows how to disable web-based proxy authentication globally:
Console> (enable) set web-auth disable
web-authentication successfully disabled on globally.
Console> (enable)
Related Commands clear web-auth
set port web-auth
set port web-auth initialize
set web-auth login-attempts
set web-auth login-fail-page
set web-auth login-page
set web-auth quiet-timeout
set web-auth session-timeout
show port web-auth
show web-auth summary
disable Disables web-based proxy authentication.
enable Enables web-based proxy authentication.