Filter
Top Products
2-923
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show cam notification
MAC addresses removed overflowed = 0
MAC address SNMP traps generated = 0
MAC address move notification disabled
CAM notification threshold disabled
CAM notification threshold limit = 100%
CAM notification threshold interval = 120 seconds
Console>
This example shows how to display the CAM notification move counters when MMC is disabled:
Console> show cam notification move counters
MAC move counters are disabled
Console>
This example shows how to display the CAM notification move counters when no entries are present:
Console> show cam notification move counters
No entries found
Console>
This example shows how to display the CAM notification move counters when you do not specify a
VLAN:
Console> show cam notification move counters
MAC move statistics of all the Vlans will be displayed
Console>
This example shows how to display the CAM notification move counters when MMC is enabled:
Console> show cam notification move counters
-----------------------------------------------------------------------------------
Vlan Mac Address From Mod/Port To Mod/Port Count
---- ----------------- ----------------------- ----------------------- ------------
1 00-01-02-04-04-01 2/3 3/1 10
200 00-01-05-03-02-01 5/3 5/1 20
Console>
This example shows how to display the CAM notification move counters when you specify a VLAN:
Console> show cam notification move counters 1
-----------------------------------------------------------------------------------
Vlan Mac Address From Mod/Port To Mod/Port Count
---- ----------------- ----------------------- ----------------------- ------------
1 00-01-02-04-04-01 2/3 3/1 15
6.2.2.4 From Mod/Port is part of an EtherChannel
Console>
This example shows how to display the CAM notification move counters when the To Mod/Port is part
of an EtherChannel:
Console> show cam notification move counters
-----------------------------------------------------------------------------------
Vlan Mac Address From Mod/Port To Mod/Port Count
---- ----------------- ----------------------- ----------------------- ------------
1 00-01-02-07-08-01 3/1 2/1,2/3,2/5,2/7 10
Console>
This example shows how to display the CAM notification move counters when both the From Mod/Port
and To Mod/Port are part of an EtherChannel:
Console> show cam notification move counters
-----------------------------------------------------------------------------------
Vlan Mac Address From Mod/Port To Mod/Port Count
---- ----------------- ----------------------- ----------------------- ------------
1 00-01-02-06-08-01 3/1,3/3,3/5,3/7 2/1,2/3,2/5,2/7 15