2-370
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set ethernet-cfm ping-reply
set ethernet-cfm ping-reply
To enable or disable the service support for CFM loop-back, use the set ethernet-cfm ping-reply
command.
set ethernet-cfm ping-reply {disable | enable | mp-only}
Syntax Description
Defaults The ping-reply is mp-only.
Command Modes Privileged.
Command Types Switch command.
Usage Guidelines This command is under evaluation and might not be implemented in phase 1.
Examples This example shows how to initialize CFM loop-back ping-reply:
Console> (enable) set ethernet-cfm ping-reply enable
CFM loop-back ping-reply is enabled.
Console> (enable)
disable Enables a response to a CFM loop-back ping.
enable Disables a response to a CFM loop-back ping.
mp-only Enables a response to a CFM loop-back ping addressed to a local MEP or
MIP only.