2-1173
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port capabilities
show port capabilities
To display the capabilities on the ports, use the show port capabilities command.
show port capabilities [mod[/port]]
show port capabilities vlan [vlan | vlan_name]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value, the ports on all modules are shown.
If you do not specify a port value, all the ports on the module are shown.
Examples This example shows how to list the port capabilities on a specific module and port:
Console> show port capabilities 1/1
Model WS-X6548-RJ-45
Port 1/1
Type 10/100BaseTX
Auto MDIX yes
AuxiliaryVlan 1..4094,untagged,dot1p,none
Broadcast suppression percentage(0-100)
Channel yes
COPS port group not supported
CoS rewrite yes
Dot1q-all-tagged yes
Dot1x yes
Duplex half,full
Fast start yes
Flow control receive-(off,on),send-(off)
Inline power no
Jumbo frames yes
Link debounce timer yes
Link debounce timer delay no
Membership static,dynamic
Port ASIC group 1/1-48
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.
vlan Limits output to ports in the specified VLAN.
vlan (Optional) VLAN number; valid values are from 1 to 4094.
vlan_name (Optional) VLAN name.