2-346
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set eou allow clientless
set eou allow clientless
To enable or disable bypassing of the LAN port IP (LPIP) posture validation for a clientless host, use
the set eou allow clientless command.
set eou allow clientless {enable | disable}
Syntax Description
Command Default The clientless mechanism is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines For configuration guidelines and restrictions, see the “Configuring Network Access Control” chapter of
the Catalyst 6500 Series Software Configuration Guide.
Examples This example shows how to enable bypassing of the LPIP posture validation for a clientless host:
Console> (enable) set eou allow clientless enable
EoU Clientless hosts will be allowed
Console> (enable)
Related Commands clear eou
set eou
set eou authorize
set eou initialize
set eou logging
set eou max-retry
set eou radius-accounting
set eou rate-limit
set eou revalidate
set eou timeout
set port eou
set security acl ip
show eou
show port eou
enable Allows clientless hosts.
disable Does not allow clientless hosts.