2-1239
Catalyst 6500 Series Switch Command Reference—Release 8.6
OL-8977-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port status
show port status
To display port status information, use the show port status command.
show port status [mod[/port]]
show port status vlan [vlan | vlan_name]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value, the ports on all modules are shown. If you do not specify a port value,
all the ports on the module are shown.
Examples This example shows how to display port status information for all ports:
Console> show port status
Port Name Status Vlan Duplex Speed Type
----- ------------------ ---------- ---------- ------ ------ ------------
1/1 connected 52 half 100 100BaseTX
1/2 notconnect half 100 100BaseTX
Console>
Table 2-80 describes the fields in the show port status command output.
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.
vlan Limits output to ports in the specified VLAN.
vlan (Optional) VLAN number; valid values are from 1 to 4094.
vlan_name (Optional) VLAN name.
Table 2-80 show port status Command Output Fields
Field Description
Port Module and port number.
Name Name (if configured) of the port.
Status Status of the port (connected, notconnect, connecting, standby, faulty, inactive,
shutdown, disabled, or monitor).