Filter
Top Products
Chapter 2 Preparing for Installation
Preparing Your Site for Installation
2-8
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
• When unpacking a static-sensitive component from its shipping carton, do not
remove the component from the antistatic packing material until you are
ready to install the component in your computer. Just before unwrapping the
antistatic packaging, be sure to discharge static electricity from your body.
• When transporting a sensitive component, first place it in an antistatic
container or packaging.
• Handle all sensitive components in a static-safe area. If possible, use
antistatic floor pads and workbench pads.
Preparing Your Site for Installation
This section describes the requirements your site must meet for safe installation
and operation of your GSS. Before you select an installation site for the GSS, read
the electrical, environmental, and physical requirements as described in
Appendix A, Specifications. Ensure that your site is properly prepared before
beginning installation.
This section includes the following requirements:
• Environmental
• Choosing a Site for Installation
• Ensuring Overcurrent Protection
• Grounding the GSS
• Creating a Safe Environment
• AC Power
• Cabling