Filter
Top Products
3-19
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
Chapter 3 Installing the GSS
Checking the Front Panel LEDs
4. Once you create a session, choose Save As from the File menu to save the
connection description. Saving the connection description has the following
two advantages:
–
The next time you launch HyperTerminal, the session is listed as an
option under Start > Programs > Accessories > HyperTerminal >
Name_of_session. This option lets you reach the CLI prompt directly
without repeating the configuration steps.
–
You can connect your cable to a different device without configuring a
new HyperTerminal session. If you use this option, ensure that you
connect to the same port on the new device as was configured in the saved
HyperTerminal session. Otherwise, a blank screen appears without a
prompt.
Checking the Front Panel LEDs
When the GSS is up and running, observe the front panel LEDs to monitor GSS
operating status. Figure 3-11 shows the location of front panel LEDs, and
Table 3-2 describes their function.
Figure 3-11 GSS 4491 Front Panel LEDs
119603
0
1
i
2
5
4
3
1