Filter
Top Products
Chapter 3 Installing the GSS
Unpacking and Inspecting the GSS
3-2
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
Unpacking and Inspecting the GSS
The GSS shipment contains the following items:
• One RJ-45 to female 25-pin sub-d connector
• Two RJ-45 to female 9-pin sub-d connectors
• One RJ-45 console cable
• One four-post rack mount kit
• One two-post rack mount kit
• Four rubber feet
• Cisco Product Documentation CD-ROM and Warranty Package
• Cisco Global Site Selector 4491 Hardware Installation Guide
• Regulatory Compliance and Safety Information for the Cisco Global Site
Selector 4491
The GSS is shipped in a protective shipping carton. It is shipped as a
self-contained chassis; no components can be added or removed.
Follow these steps to unpack the GSS:
1. Remove the GSS accessories from the shipping carton. Save the packing
materials in case you need to repack the GSS later.
2. Check the configuration of the GSS and the accessories against the items
listed on the packing slip. Report any discrepancies as described in “If the
Product is Damaged”.
3. Before installing the GSS, review the information outlined in Chapter 2,
Preparing for Installation.
If the Product is Damaged
If any portion of the unit or component is damaged in transit, forward an
immediate request to the delivering carrier to perform an inspection of the product
and to prepare a damage report. Save the container and all packing materials until
the contents are verified.