Filter
Top Products
Chapter 3 Installing the GSS
Installing Your GSS
3-6
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
Attaching the Telescopic Rails to the Rack Assembly
To attach the telescopic rails to the four-post rack assembly:
1. Extend the rail (1) as far as it will go, as shown in Figure 3-2.
2. Press the green spring plate (2) on the extended telescopic rail and remove the
inner rail. Set the rail aside for attachment to the GSS (see the “Inserting the
GSS into the Rack” section).
Figure 3-2 Removing the Inner Server Rail
119961
2
1