Filter
Top Products
Chapter 3 Installing the GSS
Installing Your GSS
3-10
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
6. Position and align the back end of the outer telescopic rail with the right side
of the rack. Ensure that the back end of the rail is aligned with the front end
and that it is flush with the rack post.
7. Attach the back end of the rail to the right side of the rack, as shown in
Figure 3-6.
Note Racks that contain tapped mounting holes do not require the cage
nuts (3) shown in Figure 3-6.
Figure 3-6 Attaching Back Rail to the Right Side of the Rack
119963
1
2
3
1 Round head screw and washer 3 Cage nut
2 Right outer telescopic rail—rear