Filter
Top Products
3-5
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
Chapter 3 Installing the GSS
Installing Your GSS
The GSS can be installed in a system 1U rack. Figure 3-1 illustrates the four-post
rack rail components. Table 3-1 describes each four-post rack rail component.
Figure 3-1 Rack Rail Components
The procedure to install the GSS into a four-post rack is divided into two parts:
• Attaching the Telescopic Rails to the Rack Assembly
• Inserting the GSS into the Rack
To install the GSS in a four-post rack by using a two-post rack bracket, see the
“Attaching a Two-Post Rack Bracket to the GSS” section.
119960
1
2
4
3
5
Table 3-1 Four-Post Rack Components
1 Left side telescopic rail 4 Round head screws (6)
2 Right side telescopic rail 5 Cage nuts (6)
3 Round head screws with washer (9)