Filter
Top Products
B-5
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
Appendix B Connecting a Modem to the GSS Console Port
Cabling a Modem to the GSS
2. Ensure that the settings on the remote console match the GSS default settings
specified in Table B-2.
Note When you remotely log in to the GSS through a modem, ensure that you log out
before disconnecting from the session. Use the exec-timeout timeout command to
set the maximum amount of time that the console session can be idle on the GSS
before it logs out. By default, the timeout is 150 minutes.
Table B-2 Console Port Default Settings
Parameters Default Settings
Baud 9600
Data Bits 8
Parity None
Stop Bits 1
Terminal Type VT100/ANSI
Flow Control None