Filter
Top Products
Appendix B Connecting a Modem to the GSS Console Port
Cabling a Modem to the GSS
B-4
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
Cabling a Modem to the GSS
After you configure the modem, perform the following steps to connect a modem
to the GSS:
1. Unplug the flat rolled RJ-45-to-RJ-45 cable from the terminal adapter on the
PC and connect the cable to the console port on the GSS (Figure B-2).
Figure B-2 Rear Panel Ports and Connectors
1 AC power receptacle 3 RJ-45 Ethernet 1 connector with
10/100/1000-Mbit/s operation
2 Console/serial connector 4 RJ-45 Ethernet 0 connector with
10/100/1000-Mbit/s operation
119605
i
4
3
1
2