Filter
Top Products
Appendix B Connecting a Modem to the GSS Console Port
Configuring a Modem
B-2
Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01
Configuring a Modem
You must configure the modem before you can connect it to the GSS. You can
connect the modem to a terminal or a PC using a terminal emulation program,
such as Hyperterminal. If you connect the modem to the COM port on a PC, you
need the following cable and connectors:
• RJ-45-to-RJ-45 rolled cable
• RJ-45-to-DB-25 modem adapter
• DB-9-to-RJ-45 terminal adapter
Figure B-1 shows the pin number assignments for the 9-pin, male D-shell console
port connector on the back of the GSS. These pin number assignments conform to
the industry standard.
Figure B-1 Console Port Connector Pin Numbers
Table B-1 connector pinouts for the GSS console port.
119657
1
5
6
9