Filter
Top Products
RAID Array 3000 Storage Subsystem
EK–SMCPQ–UG. C014-4
Figure 4-2. Saved Configuration
.
4.2.2 Update Firmware
CAUTION
If the systems disk is on the RA3000, firmware cannot
be upgraded with SWCC. Establish a temporary sys-
tem disk on a disk drive outside the RA3000 and pro-
ceed with these instructions or follow the alternative
shown in Section 4.2.2.2.
4.2.2.1 Update Firmware Using SWCC
Start SWCC and choose SCSI or Network Connection. From the Storage menu
(see Figure 4-3), select Controller, and then select Update Firmware.
Figure 4-3 Update Firmware Command