Filter
Top Products
Installing System Components 71
3
Install the hot-plug hard drive.
a
Open the handle on the hard-drive carrier.
Figure 3-4. Installing a Hot-Plug Hard Drive
b
Insert the hard-drive carrier into the drive bay until the carrier
contacts the backplane.
c
Close the handle to lock the drive in place.
4 Replace the front bezel, if it was removed in
step 1.
1 hard drive 2 drive carrier
3 drive carrier release handle
3
1
2
Book.book Page 71 Monday, September 14, 2009 12:57 PM