Filter
Top Products
Table 1. System-Board Jumper Settings
System Board Labels
Table 2 lists the labels for connectors and sockets on your system board, and it gives a brief description of their functions.
Table 2. System Board Connectors and Sockets
Expansion Cards
Each GX200 low-profile chassis can accommodate 32-bit PCI expansion cards and 16-bit and 8-bit ISA expansion cards, depending on the
installedriserboard.SeeFigure19forexamplesoftheexpansioncards.
Figure 19. Expansion Cards
Jumper
Setting
Description
PSWD
(default)
Password features are enabled.
(default)
Password features are disabled.
SAFE
(default)
Reserved (do not change).
BIOS
(default)
Reserved (do not change).
RTCRST
(default)
Real-time clock reset. Can be used for troubleshooting purposes.
jumpered unjumpered
Connector or Socket
Description
AMC
ATI multimedia channel connector
BATTERY
Battery socket
CD_IN
CD-ROM audio interface connector
RIMM_x
RIMM socket
DSKT
Diskette/tape drive interface connector
ENET
Integrated NIC connector
EXT_SPKR
External speaker connector
FAN
Microprocessor fan connector
HDLED
Hard-disk drive LED connector
IDEn
EIDE interface connector
INTRUDER
Chassis intrusion switch connector
KYBD
Keyboard connector
MODEM
Modem audio connector
MONITOR
Video connector
MOUSE
Mouse connector
PANEL
Control panel connector
PARALLEL
Parallel port connector; sometimes referred to as LPT1
PCIn*
PCI expansion-card connector
POWER_1
Main power input connector
POWER_2
3.3-V power input connector
RISER
Riser board connector
SERIALn
Serial port connector
SLOT1_PRI
Primary microprocessor connector
USB
USB connectors