Filter
Top Products
42 Installing System Components
Figure 3-2. Opening and Closing the System
Front Drive Bezel
The front drive bezel is the cover for the optional diskette and 5.25-inch drives. To remove or install a
drive, you must first remove the front drive bezel.
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. Before performing any procedure, see your Product Information Guide for
complete information about safety precautions, working inside the computer and protecting against electrostatic
discharge.
Removing the Front Drive Bezel
1
Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 41.
NOTE: The sliding plate secures and releases the front drive bezel and helps to secure the drives.
1 release tab
1
book.book Page 42 Monday, June 5, 2006 3:20 PM