Filter
Top Products
72 Installing System Components
Figure 3-20. Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1
Align the chassis intrusion switch with the securing bracket notch. See Figure 3-20.
2
Slide the switch into the securing bracket notch.
3
Connect the switch cable to the INTRUDER connector on the system board.
4
Close the system. See "Closing the System" on page 41.
5
Reconnect the system to the electrical outlet, and turn on the system.
1 chassis intrusion switch 2 securing bracket notch 3 INTRUDER connector
1
2
3
book.book Page 72 Monday, June 5, 2006 3:20 PM