Filter
Top Products
Installing System Components 57
Figure 3-13. Removing and Installing an Expansion Card
7
Close the card retention door to secure the remaining card(s) in the system. See Figure 3-13.
8
Close the system. See "Closing the System" on page 41.
9
Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
10
Remove the card’s device driver from the operating system.
Installing an Expansion Card
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. Before performing any procedure, see your Product Information Guide for
complete information about safety precautions, working inside the computer and protecting against electrostatic
discharge.
1
Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 41.
1 release tabs (2) 2 card retention door 3 alignment bar
4 alignment guide 5 filler bracket
2
5
4
3
1
book.book Page 57 Monday, June 5, 2006 3:20 PM