Filter
Top Products
74 Installing System Components
Figure 3-21. Removing the Bezel
Replacing the Bezel
1
Align the bezel with the chassis frame and slide it into position.
2
Attach the three bezel release screws to secure the bezel to the system chassis. See Figure 3-21.
3
Replace the processor fan. See "Replacing the Cooling Fans" on page 67.
4
Reinstall the heat sink and shroud assembly. See "Replacing the Processor" on page 65.
5
Close the system. See "Closing the System" on page 41.
6
Reconnect the system to the electrical outlet, and turn on the system.
I/O Panel Assembly (Service Only Parts Procedure)
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. Before performing any procedure, see your Product Information Guide for
complete information about safety precautions, working inside the computer and protecting against electrostatic
discharge.
1 bezel release screws (3) 2 bezel
1
2
book.book Page 74 Monday, June 5, 2006 3:20 PM