Filter
Top Products
Figure 25. Removing and Installing a PCIe Extender Card
1. PCIe extender card 2. screws (2)
3. connector 4. tab
5. support bracket 6. notch
Installing The Storage Controller Card/PCIe Extender Card
1. Holding by its edges, position the storage controller card/PCIe extender card so that the card-
connector aligns with the system board connector.
2. Adjust the other end of the card so that the card edge is secured to the bracket.
When correctly seated:
• the storage controller card is secured under the tabs on the support bracket.
• the notch on the PCIe extender card is securely aligned with the corresponding tab on the
support bracket.
3. Insert the card connector firmly into the system board connector until the card is fully seated.
4. Install the two screws to secure the storage controller card/PCIe extender card to the system board.
5. Reinstall the system board.
6. Install the blade in the enclosure.
67